The glass – an important component for door and window systems

Posted Leave a commentPosted in Components

As in the case of choosing the type of profile that makes up the windows and / or doors systems, the glass is another important accessory in the assembly. We help with an ideal alternative that will meet the needs of each customer. So, our recommendation is to choose the 4 Float + 3.3.1 Low-E glass because the combination of elements that makes it up is giving long-term benefits.

            Its structure consists of a float glass with a thickness of 4 mm (assembled on the outside), a rod (the thickness varies depending on the profile) and a glass 3.3.1. Low-E heat treated and layered, that is, composed of two 3 mm thick bonded glass sheets plus a fine and transparent 1 mm film (assembled on the inside).

 

Advantage:

  • Thermal isolation in winter 3 times insulating than regular window → does not allow energy loss
  • Thermal summer heat protection 2 times more than regular glass → Reduces direct sunlight
  • Light transmission up to 70%
  • Suppresses cold areas around the system
  • Reduces condensation inside the glass
  • Reduces the cost of heating significantly
  • It’s secure

 

Here are some alternatives that we can offer you:

  • 3 Float + 3 Low-E – Normal 3 mm glass (assembled on the outside) + Wand (thickness varies depending on the profile) + Glass 4 Seasons 3 mm (assembled on the inside)
  • 4 Float + 4 Low-E → 4 mm normal glass (assembled on the outside) + wand (thickness varies depending on profile) + glass 4 seasons 4 mm (assembled on the inside)
  • 4 Sand + 3.3.1. Low-E → matt glass 4 mm (assembled on the outside) + baton (thickness varies depending on the profile) + two glass sheets glued to a thickness of 3 mm plus a thin and transparent film of 1 mm (assembled on the inside)
  • 4 Stop Sol + 3.3.1. Low-E → 4 mm mirror glass (assembled to the outside) + wand (thickness varies depending on the profile) + two glass sheets glued to a thickness of 3 mm plus a fine and transparent film of 1 mm (assembled on the inside)

Likewise, we offer our clients also other glass versions starting from the low-cost version to customized and laminated (anti-bullet) versions – 5mm and double-coated.

The IDEAL 4000 Wing Renovation Profile – the ideal choice for warm houses

Posted Leave a commentPosted in Products

Why to choose this profile?

It is simple! When it comes to window and door systems that make up the home, the primary aspects that must necessarily be met are isolation and design. Most often, we adopt a general view, so that the two characteristics are ranked somehow inferior. Because we want to open the road to innovation, we present an alternative to PVC carpentry.

The Aluplast IDEAL 4000 features a five-chamber structure, two levels of beating garnishes, a 70 mm constructive depth and a thermal isolation up to 1.3 W / K. It is available in two versions: with a 40 mm and 65 mm wing.

Benefits:

  • High thermal isolation
  • Internal installation
  • Allowing the 180 ° opening of the window / door
  • Allows the application of a glass up to 41 mm thick
  • Allows hidden drainage
  • Composed of two garnishes
  • Intrusion resistance when opting for a safety harness
  • Variety of colors
  • CE marked (EU Standards) with quality certificate